E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2) - EFLA1030B
E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2)
The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilisation systems
- Drive up to 7 analogue or 6 digital standard-size servos with the BEC
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
E-flite 30-Amp Pro Switch-Mode BEC Brushless ESC (V2) EFLA1030B is compatible with the following models; EFL11450, EFL11460, EFL11475, EFL2725, EFL2900, EFL3100, EFL3100E, EFL3180, EFL3650, EFL3675, EFL4450, EFL4950, EFL4975, EFL6750, EFL6775, EFL6850, EFL6875, FCEF5075, HBZ8200, HBZ8280, PKZ1950, PKZ1975, PKZ4200, PKZ4275, PKZ4300, PKZ4375, PKZ4400, PKZ4475, PKZ4480, PKZ4600, PKZ4675, PKZ4700, PKZ4775, PKZ4975, PKZ4980, PKZ5075, PKZ5080, PKZ5175, PKZ5180, PKZ5275, PKZ5375, PKZ5380, PKZ5475, PKZ5575, PKZ5580, PKZ5775, PKZ5780, PKZ5975, PKZ5980, PKZ6075, PKZ6080, PKZ6975, PKZ6980, PKZ8150, PKZ8175, PKZ8250, PKZ8275
