Etronix Photon System with 3.5D 2150KV Brushless Motor and 120A ESC for 1/8 Scale - ET0435
Etronix Photon System with 3.5D 2150KV Brushless Motor and 120A ESC for 1/8 Scale - ET0435
The convenience and performance of brushless technology is available for everyone with the Photon Sensorless System from Etronix. Simple to set-up and with a range of sensible KV rated motors for most R/C car applications and abilities the Photon is the ideal brushless start-up package or upgrade from a stock brushed set-up. An ideal choice for any 1/8th buggy, truggy, short course or monster truck application.
Two systems are available in the range 120A more suited for RTR applications and a 150A for higher end buggy/truck competitive demands. Also features a separate sensor cable port for use with Sensored aftermarket motors.
With the programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.
Specifications:
Battery Type - 2-6S LiPo or 5-18 Cell NiMh/NiCd
BEC Output - 3A 6V/8.4V Adjustable BEC Output
Constant Current - 120A
Burst Current - 7600A
Motor - 3.5D 2150KV 4 Pole Brushless Sensorless
Dimensions - 55 x 48 x 37mm
Supplied with (ET0107) Etronix Photon SBS LED Programming Card
With the programmable set up card (ET0107) the user can finely tune ten different parameters within the ESC to suit their particular needs.
Adjustable Parameters
- Cut-off Voltage (automatically detects the number of cells)
- Running Mode (forward w/o reverse, forward/reverse, forward with pause then reverse)
- Motor Timing (very low, low, normal, high, very high)
- Initial Acceleration (low, medium, high, very high)
- Throttle Percent Reverse (20% through to 100%)
- Throttle Limit (0% through to 90%)
- Percentage Braking (10% through to 100%)
- Percentage Drag Brake (0% through to 30%)
- Motor Rotation (normal, reverse)
- Neutral Range (dead band setting 2% through to 10%)
Please Note: Power wires and motor wires require soldering
