Sky RC T400Q Quattro AC/DC Balance Charger and Discharger for LiPo, LiFe, LiHV, NiMh Batteries

With the classic, minimal, and sleek vertical tower design, T400Q frees up more bench space for RC hobbyists to tweak gadgets by taking the footprints of a pair of battery packs.
T400Q can simultaneously deliver up to 100 watts and 12 amps per charging circuit. The total charging power is 400 watts. It allows hobbyists to get prepared in the shortest time, whether charging the receiver's battery or up to 6S Lithium battery packs and 15S NiMh/ NiCd packs.

Power is always the most important thing for an RC hobbyist! Whether RC enthusiasts are playing cars, boats, planes, FPV or racing drones, power is vital for speed, burst current and battery life. T400Q charger is the must-have, that every RC gurus should own!

Quad-port Charging
Performance Re-optimised! SkyRC T400Q is a multi-chemistry Quattro balance charger/discharger with four independent circuits that can work simultaneously.
It’s charging algorithm suits the most common battery chemistries in the market, such as LiPo, LiIon, LiHV, LiFe, NiMh, NiCd, and Pb (lead-acid).

Sleek Meets Usability
Sleek design serves your charging and delights your eyes.

Genuine XT60
The built-in XT60* connectors on this juice box, is not only anti-reversal but also more reliable. *Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle a maximum 60A peak current for extended periods without exceeding 80℃ thanks to their gold-plated spring pins' better contact surface area.

Specifications:
DC Input Voltage - 11-18v
AC Input Voltage - 100-240v 50/60HZ
Charge Wattage - 100w x 4
Discharge Wattage - 10w
LiPo/LiHV/LiFe/LiIon - 1-6S (3.7v-22.2v)
NiMh/NiCd - 1-15S (1.2v-18v)
Pb - 2-20v (Lead Acid)
Battery Capacity Range
NiMh/NiCd - 100-50000mAh
LiPo/LiIon/LiFe/LiHV - 100-50000mAh
Pb - 100-50000mAh
Charge Voltage
NiMh/NiCd - Delta peak detection
LiPo- 4.18-4.25V/S
LiFe - 3.58-3.7V/S
Pb - 1.8-2.0V/S
LiIon- 4.08-4.2V/S
LiHV- 4.25-4.35V/S
Discharge Cut-off Voltage
NiMh/NiCd - 0.1-1.1V/S
LiPo - 3.0-3.3V/S
LiFe - 2.6-2.9V/S
LiIon- 2.9-3.2V/S
LiHV - 3.1-3.4V/S
Case Size - 186x103x209mm
Weight - 1610g

Note: AC Input lead supplied with UK plug.

Please Note: Batteries must be charged using a specifically designed charger for your battery.  Never charge batteries unattended, when not properly used, batteries may burst into flames and catch fire.  It is highly recommended that a safe pouch or fireproof container is used for storage and whilst charging the battery. By purchasing this item the buyer assumes all risks associated with its use.